Bring New Life to your Outdoor Surfaces with the ACRYFIN® DIY Coating Kit
Restore, resurface, and protect decks, docks, pool decks, patios, walkways, and concrete surfaces using the same industrial-strength acrylic polymer coating system our certified installers trust every day. Easy to apply and built for extreme weather, it's the smarter alternative to costly replacement.
Restore and protect your outdoor surfaces with the same industrial-strength acrylic polymer coating system trusted by our certified installers. Designed for wood and concrete surfaces, the ACRYFIN® DIY Kit makes it easy to restore decks, docks, pool decks, patios, walkways, stairs, and other outdoor spaces without the cost of replacement.
Whether you're tackling a residential project or refreshing a waterfront property, our durable, slip-resistant coating is built to withstand Florida's sun, salt air, moisture, and everyday wear while delivering professional-quality, long-lasting results.
Have questions about your project or whether ACRYFIN® is right for your surface? Our team is happy to help you choose the right kit and answer any application questions before you get started.
Wood Decks
Concrete Patios
Pool Decks
Boat Docks
Walkways
Driveways
Porches
Exterior Stairs
Ideal Applications for ACRYFIN® Acrylic Polymer Coatings:
Order Your ACRYFIN® DIY Coating Kit
What’s Included in the Kit:
½ Gallon Primer – prepares the surface for maximum adhesion
1 Gallon Resin – the backbone of the coating system
1 Bag Aggregate (12 lbs.) – slip-resistant strength and texture
½ Gallon Clear UV Coat – long-lasting protection against sun and weather
$399 per kit
Weight: 46 lbs
Dimensions: 12″ x 12″ x 12″For bulk pricing, call us at 877-661-5640.
Each kit covers between 120–200 sq. ft. depending on surface condition. 1 kit covers ~150 sq. ft. on average. Simply divide your total square footage by 150 to estimate how many kits (and stain gallons) you’ll need.
What You’ll Need to Add:
1 gallon of any solid-color water-based exterior stain (not included)
Coverage Guide
-
EXAMPLE: A 240 SQ. FT. DOCK WILL REQUIRE 2-3 KITS AND THE SAME NUMBER OF STAIN GALLONS DEPENDING ON THE CONDITION OF THE WOOD
-
EXAMPLE: A 400 SQ. FT. POOL DECK WILL REQUIRE 2 KITS AND 2 GALLONS OF STAIN.
-
EXAMPLE: A 300 SQ. FT. BACKYARD DECK IN FAIR CONDITION WILL REQUIRE 2 KITS AND 2 GALLONS OF STAIN.
-
EXAMPLE: A 300 SQ. FT. WOOD PATIO IN FAIR CONDITION WILL REQUIRE 2 KITS AND 2 GALLONS OF STAIN.
Why Choose the Acryfin® DIY Kit?
-
Our proprietary acrylic polymer coating system is engineered to withstand:
Intense UV exposure
Salt air
Heavy rain & humidity
Pool chemicals
Heavy foot traffic
Marine environments
-
If your surface is structurally sound, restoration can provide a beautiful, durable finish without the cost and disruption of replacement.
Saves homeowners and marinas thousands vs. replacement
Low-maintenance solution—no constant upkeep
Easy-to-follow instructions for DIY success
Extends the life of wood, concrete, and more
-
Improve traction on decks, docks, pool decks, stairs, and walkways with textured finishes designed for safer outdoor spaces.
-
Unlike traditional paints and sealers, ACRYFIN® provides long-lasting protection with less maintenance and is backed by a 10-Year Warranty.
-
Non-toxic, VOC-free, and environmentally safe coatings
How to Apply Your ACRYFIN® DIY Coating Kit
-
Before You Begin
For the best results, ensure the surface is:
Clean, dry, and free of dirt, loose coatings, mildew, and debris.
Structurally sound and ready for restoration.
At a moisture content of 15% or less (verify with a moisture meter).
Applied in temperatures between 50°F and 80°F.
Step 1 – Prime the Surface
Apply ACRYFIN® Primer evenly to the clean, dry wood surface using a sprayer or a ⅜-inch nap roller.
Allow the primer to penetrate and become tack-free (approximately 10–15 minutes) before applying the coating.
Step 2 – Mix the Coating
In a clean 5-gallon bucket, combine:
1 gallon of water-based solid color exterior stain (or the recommended ACRYFIN® color system)
1 gallon of ACRYFIN® Acrylic Polymer Resin
Mix thoroughly with a high-speed paddle mixer for approximately 30 seconds until fully blended.
Step 3 – Add the Aggregate
While mixing, slowly add 1 bag of ACRYFIN® Aggregate.
Continue mixing for 1–2 minutes, scraping the sides of the bucket as needed until the mixture is smooth, consistent, and free of dry material.
Step 4 – Apply the First Coat
Using a 1¼-inch nap roller, apply an even coat over the entire surface. Use a brush to coat edges, corners, railings, and tight spaces.
Work the coating into cracks, joints, and surface imperfections during the first coat for maximum coverage and protection.
Step 5 – Apply the Second Coat
Once the first coat is dry to the touch, apply a second coat using the same application method.
The second coat provides additional coverage, texture, and long-lasting durability.
Step 6 – Apply the UV Protective Sealer
After the coating has dried, apply a thin, even coat of ACRYFIN® Clear UV Sealer using a sprayer or ⅜-inch nap roller.
The UV sealer enhances color retention while protecting the surface from sun exposure, moisture, and everyday wear.
Curing
Allow the surface to cure for 48–72 hours before returning it to normal use.
During the curing period, keep the surface free from:
Foot traffic
Furniture
Pets
Planters and equipment
Water exposure whenever possible
Once fully cured, your restored wood surface will have a durable, slip-resistant finish designed to withstand Florida's sun, moisture, and everyday outdoor use.
-
Before You Begin
For the best results, ensure the surface is:
Clean, dry, and free of dirt, grease, oil, loose coatings, and debris.
Structurally sound and ready for restoration.
Applied in temperatures between 50°F and 80°F.
Completely dry before priming.
Step 1 – Prime the Surface
Apply ACRYFIN® Primer evenly to the clean, dry surface using a roller or brush.
Allow the primer to dry completely before applying the coating system.
Step 2 – Mix the Coating
In a clean 5-gallon bucket, combine:
2 gallons of water-based solid color concrete stain (or the recommended ACRYFIN® color system)
1 gallon of ACRYFIN® Acrylic Polymer Resin
Mix thoroughly with a high-speed paddle mixer for approximately 30 seconds until fully blended.
Step 3 – Add the Aggregate
While mixing, slowly add 1 bag of ACRYFIN® Aggregate.
Continue mixing for 1–2 minutes, scraping the sides of the bucket as needed to ensure a smooth, consistent mixture with no dry material remaining.
Step 4 – Apply the First Coat
Using a ½-inch nap roller, apply an even coat across the surface. Use a brush to cut in around edges, corners, and tight areas.
Work the coating into any small cracks or surface imperfections during the first coat.
Step 5 – Apply the Second Coat
Once the first coat is dry to the touch, apply a second coat using the same application method.
The second coat will provide additional coverage, texture, and long-lasting durability.
Step 6 – Apply the UV Protective Sealer
Once the coating has dried, apply a thin, even coat of ACRYFIN® Clear UV Sealer using a ⅜-inch nap roller.
The UV sealer helps protect the finish from fading, moisture, and everyday wear while enhancing long-term performance.
Curing
Allow the surface to cure for 48–72 hours before returning it to normal use.
During the curing period, keep the surface free from:
Foot traffic
Furniture
Pets
Planters and equipment
Water exposure whenever possible
Once fully cured, your restored surface is ready to enjoy with durable, long-lasting protection.
Ready to Restore Your Outdoor Surfaces?
Have questions about your project or whether ACRYFIN® is right for your surface? Our team is happy to help you choose the right kit and answer any application questions before you get started.